Either using your free issue material or complete
supply, we can offer plate rolling or plate forming in a wide range
of carbon and stainless steels from 5mm thick
in up to 3 metre lengths, or up to 200mm thick
on our plate forming equipment
A proportion of our range can be pre-ended without
an additional bending allowance to minimise waste
and can be supplied with flame cut or machined
edge and / or end preps.
To compliment our plate rolling and plate forming operations
we offer an in-house welding service enabling
us to re-roll to tight tolerances prior to despatch
and join tubes with full penetration circumferential
welds to achieve longer lengths.
All our Submerged Arc, M.I.G. and T.I.G. weld
procedures and welders are coded to the latest
American and British standards.
|
|
Winch Drum for Offshore application |
We have strong links with local subcontractors and
are able to offer the full range of N.D.T. operations
including;- radiography, ultrasonic test, dye pen and
M.P.I. also heat treatment operations including;- stress
relieve, normalise and solution anneal.
Longer items can be formed using different techniques,
see our press braking section for more information.
KEYPOINTS
|
Wide ferrous and non ferrous material
range |
|
Huge thickness range 5mm 200mm |
|
End / edge prep ing available, machined
or flame cut |
|
Coded longitudinal and circumferential
welding offered |
|
Can supply rolled, prep roll and bridge
tack or rolled and welded |
|
Heat treatment to customer requirements |
|
Non destructive testing as required |
| |
|
|
|
|
|
130mm thick plate
formed & welded |
Circumferential welding of
thick walled cylinders |
Close up of weld prep
on 100mm thick steel |
3000mm wide plate
being formed |
|
|
